1280×1024 cooled MWIR infrared module
MWIR 3.7–4.8 μm
1280×1024, 10μm HgCdTe (MCT) cooled MWIR infrared module, F4.0 aperture, NETD ≤40mK, 25Hz frame rate, default F4 30~150mm continuous-zoom lens; provides SDI / CameraLink / MIPI interface configurations and RS422 control.
1280×1024, 10μm HgCdTe (MCT) cooled MWIR infrared module, F4.0 aperture, NETD ≤40mK, 25Hz frame rate, default F4 30~150mm continuous-zoom lens; provides SDI / CameraLink / MIPI interface configurations and RS422 control.
| Lens Configuration | F4.0 30~150mm continuous zoom (default); optional fixed-focus athermalized / fixed-focus motorized-focus lens |
| Interface Configuration | SDI / CameraLink / MIPI (choose one of three) |
| FOV (continuous zoom, est.) | 24.1°×19.4° ~ 4.9°×3.9° |
| IFOV (continuous zoom, est.) | 0.33 ~ 0.067 mrad |
| Electronic Zoom | 1× (default) / 2× / 4× |
| Detector | HgCdTe (MCT) cooled infrared detector |
| Resolution | 1280×1024 |
| Pixel Pitch | 10 μm |
| Spectral response | 3.7~4.8 μm |
| F-Number | F4.0 |
| Blind Pixel | ≤1% |
| NETD | ≤40 mK @ 25℃ (system-level test) |
| MRTD | ≤350 mK (12 cy/mrad, minimum FOV) |
| Frame rate | 25 Hz |
| Cool-down time | ≤6 min at room temperature, ≤8 min at high temperature |
| Non-uniformity (after correction) | ≥5‰ |
| Non-Uniformity Correction (NUC) | Shutter/background correction; auto/manual/disabled (default auto, interval adjustable 0~255min, correction time ≤1.5s) |
| Correction indication | On-screen character feedback "Correcting / Correction complete" |
| Image enhancement (DDE) | 0~7 levels (factory default: level 4) |
| Brightness / Contrast | 0~100, auto/manual |
| Polarity | White-hot (default) / Black-hot |
| False Color | 48 false color palettes in addition to white-hot/black-hot |
| Crosshair reticle | Show / Hide (default) / Move |
| Solar Protection | Supported (threshold 0~16383, default 16000) |
| Image mirroring | Off (default) / Left-right / Up-down / Diagonal |
| Blind Pixel Replacement | Serial command search & save + real-time automatic find-and-replace |
| Test Pattern Output | Gradient / checkerboard test pattern |
| Self-Test | Power-on self-test / command self-test / timed self-test |
| Software Upgrade | Serial firmware upgrade |
| Total zoom time | ≤6 s at room/high temperature, ≤8 s at low temperature |
| Auto Focus Time | ≤2.5 s at room/high temperature, ≤4 s at low temperature (near best focus) |
| One-touch focus time | ≤2 s |
| Optical axis alignment | FOV20~FOV16 ≤2 pixels; FOV15~FOV1 ≤4 pixels |
| Optical axis stability | ≤2 pixels |
| Optical axis repeatability | ≤2 pixels (minimum FOV) |
| Parfocality | Best-focus point deviation < 10% of total travel over the full temperature range |
| Zoom/focus control | Step/continuous zoom, step/continuous focus, follow focus, one-touch set/query |
| Video Output | SDI / CameraLink / MIPI (per interface configuration) |
| Communication Interface | RS422, 115200bps (8 data bits, 1 start bit, 1 stop bit, no parity) |
| External sync | Internal sync / external sync input / output / adaptive (50 Hz) |
| Power-up/power-down control | TTL level (3.3 V) |
| SDI Configuration | DC 22~30.3 V (typical 28 V), steady-state ≤25 W, peak ≤50 W |
| CameraLink Configuration | DC 18~32 V (typical 28 V), steady-state ≤30 W, peak ≤50 W |
| MIPI Configuration | DC 12~24 V (typical 12 V), steady-state ≤16 W, peak ≤34 W |
| Insulation Resistance | >20 MΩ (chassis ground insulated from signal ground and power ground) |
| Power Protection | Reverse polarity / overvoltage protection |
| Dimensions | ≤234×118×116 mm (depending on configuration) |
| Weight | ≤2.5 kg（±50 g） |
| Operating Temperature | -40~+60 ℃ |
| Storage Temperature | -45~+65 ℃ |
| Humidity | 5%~95%, non-condensing |
| Vibration | ≥2g (15~500 Hz), 15 min per axis along three axes |
| Shock | 15g half-sine, three shocks in each of the six directions of the three axes |
| Fully domestically sourced | 100% domestically sourced |
Compiled from the M12A Technical Specification V1.0 (2026-07); (est.) values are optical-geometry references.
A 10 μm, 1024×768 HOT cooled MWIR imaging module with a 144 mm athermalized lens, Camera Link output, ≤40 mK NETD, and compact 200×77×62 mm packaging.
640×512 cooled MWIR module built on a 15 μm detector and RS058 cryocooler, NETD down to 16 mK. Pictured configuration ships with a 15–300 mm / F5.5 continuous-zoom lens; CameraLink with RAW/YUV output, further zoom options up to 32–730 mm / F4.
See the module and related imaging technology in real field footage.
Long-range surveillance
Explore border & perimeter security applications
Aerospace
Explore aerospace & airborne electro-optics applications
Integrated Electro-Optical Systems
Explore security system integration solutions
Environmental Protection
Explore agriculture & environmental monitoring applications
Gas Leak Detection
Explore gas leak detection applications
Each card above links to a dedicated application page covering integration considerations, recommended module pairings and typical configurations. Don't see your scenario? Contact us for a tailored proposal.
Contact our engineering team to discuss integration requirements, custom configurations, and volume pricing.
Send us a message and our engineering team will respond within one business day.
